Clip-In Door Seal
NEW The new push fit seal simply clips in and out of the groove making adjustments at the door fitting stage easy and fast.
Ease of use during redecoration. The seal can be easily removed from the top or bottom of the door using a screw driver to release it, so the decoration can occur without damaging the seal.
By simply routing a groove 5mm deeper than required for the seal itself, the additional grooving if door edges need further planning is eliminated. When the door set correctly closes and is ready to use, the carpenter just clips the seal into the groove.
In a fire this is a powerful fire seal. The intumescent is contained on the back edge facing the deeper groove. In the case of a fire, the intumescent fills the groove and then powerfully pushes against the frame edge holding the door firmly in place, protecting the escape route from both fire and smoke.
BRUSH OPTIONS ARE AVAILABLE